La Crosse Weather Station Mounting Pole

For sitting your weather station, we powerfully advise you to follow the National Weather service’s citizen weather guidelines observe the program.

Likely, you would not be capable of meeting all the advice here, but try to get as near as easy and bear in mind to keep the sensors within the wireless range of the console.

La Crosse Weather Station with Colour Display Canadian Tire

Humidity/temperature sensor: located on level ground, over a natural surface within a radiation shield at eye level. Perfectly at a horizontal distance of at least 2 times the height of any close by attractions and well away from any sources of artificial heat (chimneys, roofs, concrete, metal fence, etc.).

Anemometer: Mount at the height of thirty-three feet above ground level and perfectly at a horizontal distance of ten times the height of the nearest obstruction. If you mount the anemone to the side of a mast rather than the top, the anemometer should be located at least 3 times the diameter away from the key mast.

Rain gauge: CWOP advises that the rain gauge is mounted at the height of 4-6 feet above the ground. It should perfectly be located at a horizontal distance of at least 4 times the height of close by obstructions. Also, make sure the gauge is level and at a place where splashback from the ground and other areas cannot occur.

All-in-one sensor suites: if you have a station with an all-in-one sensor suite, you will have to compromise between the anemometer and humidity/temp/rain sensors. The top choice is to go somewhere in between. Ten feet or higher is advised.

Whatever weather station mounting kit you pick, ensure the mast is the right diameter for your specific station.

Read Next – La Crosse Color Wireless Forecast Station C85845

A Review Of The La Crosse Wireless Weather Station Model 

Read Next – ACURITE Iris 01022M (5-in-1) Weather Station Review 

Read Next – BALDR Weather Station Review