Davis Vantage PRO2 Weather Station Best Price

Davis Vantage Pro 2 weather stations are accessible in cabled and wireless versions.

All contain a creative integrated sensor suite, which gathers a rain collector, humidity sensors, temperature sensors, and anemometer into one plan, making it easier than ever and improving reliability.

Switch between U.S. and metric units of measure at the push of the key.

The Davis Vantage Pro 2 contains all of Vantage Pro2 plus a UV sensor, sensor mounting, and solar radiation sensor. The UV sensor gives the UV dose and UV Index. It can also measure solar radiation intensity, evapotranspiration, and temp-hum-sun wind index.

The Davis Vantage Pro 2 contains the receiver/console plus the integrated sensor suite with a transmitter and solar panel.

The wireless range is up to a three-hundred m line of sight. The specific content is 60 to 120 m in most situations, depending upon terrain and the building’s structural specs. The console may be run using the added AC power adapter or 3 C batteries. Batteries last up to 1 year in general situations.

The big LCD Vantage Pro 2 gadget displays data or lows and highs for up to twenty-four days, months, or years.

The console also shows a local forecast, including a ticker-tape display for more detail. You can view over eighty graphs, including extra rain analysis, temperature, rate, barometric pressure, and wind.

All without a computer!

Features Davis Vantage PRO2 Weather Station 

It contains a Vantage Pro two receiver/console, an integrated sensor suite, and mounting hardware. The integrated sensor suite includes temperature, rain collector, humidity sensors, anemometer cable, and solar panel.

Electronic parts are housed in a weather-resistant shelter. Sensors are housed within a radiation shield for better temperature, accuracy, and humidity.

The sensor suite is solar run. Electronic parts are housed in a weather-resistant shelter.

The console may be run using the added AC-power adapter or 3 C batteries.

Quick view icons present the forecast at a glance, while a moving ticker-tape shows full details. The console also shows on-screen graphs.

It transmits wirelessly up to one thousand feet outdoors, within line of sight. Under most situations, the typical range via walls is 200 to 400.

The cabled station contains a 100ft cable from the console to the sensor suite.

Key Features

• Outside and inside humidity
• Barometric pressure
• Wind chill
• Wind speed and direction
• Rain
• Dew point
• Moon phase
• Time of sunrise and sunset at your place
• Heat index
• Local forecast
• Rainfall totals for the last twenty-four storms
• Local forecast
• Here are the lows and highs for most weather variables, with time or date, for each of the last twenty-four hours, months, days, and years.

Read Next – AcuRite 01512 Wireless Home Station

The big LCD Vantage Pro two console displays data or lows and highs for up to twenty-four different days, years, or months.

The console also shows a domestic forecast, including a ticker-tape display for more detail.

Read Next – AcuRite 01022M Pro Station – Very durable

Advantages of Davis Vantage Pro 2

Console

The VP2 display gadget is the unit that sits indoors to give a comprehensive show of present weather situations on its big LCD. The console works as a receiver and processor of the raw outside data as a display unit and supports the station’s optional data logger if fitted.

Consoles come in cable and wireless versions and must match a corresponding line or outside wireless sensors.

Also accessible is a type of console without a display called an Envoy unit.

Integrated Sensor Suite (ISS) and Anemometer

In a standard VP2 station, the open-air sensors are grouped into two units: the anemometer, which measures wind direction and speed, and the integrated sensor suite, which contains humidity, temperature, and rain gauge sensors.

The ISS is also a mounting point for fitted UV sensors and solar radiation.

The ISS comes in 2 versions: cabled and wireless. In a wireless station, the circuitry within the radiation should have a wireless transmitter.

The wireless ISS is packed with a solar panel to supplement the built-in lithium battery and power the wireless/sensor circuitry. In cabled editions, a single cable joins the ISS and gadgets—a significant improvement compared to the three lines necessary with older station designs. This will naturally do best in the United Kingdom when faced south.

The anemometer is supplied with a twelve-cm cable and can be mounted up to 12 cm away from the critical body of the ISS. Standard extension cables can be bought to raise this distance if needed. For wireless VP stations only, a separate anemometer transmitter can be purchased, which permits the anemometer and ISS to be mounted entirely independently.

What is the difference between the Pro 2 and the Pro 2 plus?

The Vantage Pro 2 Plus comes with UV standard and solar radiation sensors. If you purchase the Pro2 and later want these sensors, you will have to buy them separately, which is more costly.

Other than that, they are the same. Most weather lovers will be well served with the standard pro2 model.

Read Next – Best Black Friday Sale Weather Station For You in 2022

What is the difference between Pro2 and Vantage Vue?

The most significant difference is the sensor suite. The vantage views use an integrated sensor suite, which most weather station producers do.

The Vantage Pro 2 has a separate anemometer, allowing you to place it at the best height. Theoretically, this will give you good readings—the Vantage Pro 2 permits expandability without the weather link live base unit.

Read Next – La Crosse Weather Station Mounting Pole

Does the Davis sonic anemometer value it?

Sonic anemometers are becoming more popular in home weather stations. They have distinct benefits, including no moving parts and excellent accuracy and sensitivity. The standard Vantage Pro 2 anemometer has withstood wind gusts up to 120 mph. However, it also has a restriction of 89.5 mph.

Read Next – Black Friday Weather Station

Setting up the Vantage Pro 2

The Vantage Pro 2 is a spec-packed station with many parts that combine many parts. Installation time will change depending on which plan you buy. This plan should take about 30-40 minutes, although you might need an hour or more.

Install the sensor suite quickly, as you will need it reporting before setting up your WeatherLink live base unit. Davis’s directions are pretty simple for both, so we doubt you will have any problems.

After the sensor suite and console are set up, you can set up the rest of your sensors, which are pretty simple to mount and include in the weather station installation.

Read Next – Best Home Weather Stations Wireless Indoor Outdoor

Market-leading accuracy

The Vantage Pro is the market leader in radio. Most of the sensors in the Vantage Pro2 are excellent versions of those in the Vantage Vue. A creative sensor suite is the star of the show here.

There are some differences between models in terms of features. In higher-end models, the radiation shielding around the humidity and temperature sensor is fan-aspirated.

Fan aspiration improves the shielding’s performance. While the larger area around the humidity/temperature sensor should permit better airflow than the Vantage Vue compact design, some warm buildup still happens.

A shield fan helps move air around and keeps this from happening.

The Vantage Pro 2 also features a big cone known as the “Aerocone” to improve the rain gauge’s accuracy. Davis says the cone’s shape stops turbulence around the gauge’s mouth, which can prevent rain from entering the meter itself.

With the Vantage Pro 2, you can choose between the traditional cup and vane anemometer and the latest sonic anemometer.

With the sonic anemometer choice, you will get excellent precision wind readings and pay the best deal.

Davis Vantage Pro 2 Wireless Home Weather Station Complete Review

Read Next – La Crosse Wireless WiFi Weather Station